Scan this code! phone_iphone

L327 Nude | Gel Polish 7ml

€7.50
Tax included

Application:

  • Make sure that the nail plate is adequately prepared, completely clean and free of cuticles.
  • Use a Buffer to the whole of the nail plate and remove the dust with a brush.
  • Remove the dusts with a pad soaked in Pure Acetone.
  • Apply Antifungal to the entire nail plate.
  • Once again clean with a a pad soaked in Pure Acetone.
  • Apply Non Acid Primer – Bonder to the entire surface of the natural nail (from the cuticles to the free edge) without touching the cuticles and the side folds of the nail.
  • Apply a thin layer of the desired Laloo Base (Base Coat or Graphen Base in the color of your choice).
  • Cure in Led Lamp for 60sec or in UV Lamp for 120sec.
  • Apply a thin layer of the color of your choice.
  • Cure in Led Lamp for 60sec or in UV Lamp for 120sec.
  • Apply a second layer of the color of your choice.
  • Cure in Led Lamp for 60sec or in UV Lamp for 120sec.
  • Apply a layer of Laloo Cosmetics Top Coat or Non Wipe Top Coat or Matte Non Wipe Top Coat and cure in Led Lamp for 60sec or in UV Lamp for 120sec.

* If you use a wipe off Top Coat which leaves a sticky residue, you should finally remove it with Laloo Cosmetics Cleaner Ultra Shine Effect or oil free 70vol alcohol lotion.

**If you use Non Wipe Top Coat, after the curing procedure you must let the customer's nails "cool down" for 1-1.5 minutes before touching them, or else they will lose their super shine!

Last but not least, we complete the manicure procedure with the application of oils to restore the pH of the nail and surrounding skin.

Removal:

1. Using Magic Gel Off

  • With a 100/180 file, remove the layer of the Top Coat.
  • Apply a sufficient amount of Magic Gel Off all over the nail.
  • Wait 4-8 minutes.
  • With a wooden or metal pusher carefully remove the product, taking care not to injure our natural nail.
  • With a 100/150 Laloo Cosmetics Buffer, smoothen the nail plate from any residues.
  • Clean the natural nail using Laloo Cosmetics Cleaner Ultra Shine Effect.
  • Lastly, moisturize with Dad'Oil to restore the pH of the natural nail!

Caution: The product should not come into contact with your skin and eyes. Keep out of reach of children.

2. Using Laloo Acetone

  • Using a 100/180 file, remove the layer of the Top Coat.
  • Soak special wraps for soak off gel polish removal with  Pure Acetone Laloo Cosmetics and wrap each nail separately.
  • Wait 4-8 minutes.
  • With a wooden or metal pusher carefully remove the product, cautious not to injure your natural nail.
  • With a 100/150 Laloo Cosmetics Buffer, smoothen the nail plate from any residues.
  • Clean your natural nail using Laloo Cosmetics Cleaner Ultra Shine Effect.
  • Moisturize your nails and cuticle area with Dad'Oil to restore the pH of the natural nail.

3. Using a nail drill

Select the appropriate drill bit and with gentle movements, carefully remove the gel polish off of your nails, with extreme care not to damage the natural nail plate.

Advantages 

Polymerise with a  LED,UV,CCFL lamp 

Easy to apply 

Will last more than 3 weeks 

Perfect coverage  

Excellent product at a competitive price 

Can be easily and quickly removed in 7-10 minutes with pure nail polish remover or with a removal device.

Does not cause allergic irritations to the skin  

Dermatologically tested 

European product 

Application

 

1. Clean thoroughly the surface of the nail from cuticles and hangnails.

2. Scratch smoothly with a Buffer and remove the dust from the nail with a small brush. Then, clean the nail with pure nail polish remover. 

3. Shake vigorously before applying the product. 

4. Apply a thin layer of Base Coat and polymerise with a LED lamp for 60 seconds or with a UV lamp for 120 seconds. 

5. Apply a very thin first layer of colour and polymerise with a LED lamp for 60 seconds or with a UV lamp for 120 seconds. 

6. Apply a second layer of colour and polymerise in the same way. 

7. Apply a thin layer of Top Coat and polymerise with a LED lamp for 60 seconds or with a UV lamp for 120 seconds. 

8. Finally, remove the sticky substance with NailProCare Nail Cleaner.

Removal 

1. Put pure nail polish remover on a cellulose band wrapped in aluminum foil or the  Remover Wraps NailProCare and wrap your fingers for 7-10 minutes. 

2. Unwrap and with the help of small wooden sticks (or metal pushers) remove the material. 

3. Finally, file your nails if necessary. 

0541
No reviews

You might also like

Customers who bought this product also bought:

Product added to wishlist
Product added to compare.

We are using cookies to give you the best experience when using our website!